The AL100 is a five to fifteen port industrial Gigabit Ethernet switch box. The self managed solution is provided with up to twelve M12-X connectors, and up to three RJ45 jacks. The AL100 is available for DIN rail or wall mount. The M12-A power input accepts 9-57VDC. As an option the box can be equipped with a terminal block power connector.

The AL100 is based on the Marvell® 88E6390 Ethernet switch. Supported speeds on the M12-X and RJ45 ports are 1000BASE-T, 100BASE-TX and 10BASE-T. As AL110, the switch box is also available with a mezzanine CPU card (AC370) for additional protocol support such as AVB/TSN, and Wi-Fi wireless communication.

AL100 • 5 to 15 Port GbE Switch

Feature Summary

General 1000BASE-T Ethernet Switch box, for DIN rail mount Intended for industrial use Self-managed operation Scalable 5 to 15 ports (stacked construction) Dimensions AL100: 30/60/90mm (W) x 140mm (H) x 70mm (D) w/o DIN rail brackets Dimensions AL110: 45mm (W) x 140mm (H) x 70mm (D) w/o DIN rail brackets Metal case M12-X Gigabit Ethernet connectors, 4 to 12 ports RJ45 Gigabit Ethernet connectors 1 to 3 ports M12-A Front power connector Terminal block power connector (option) Option desktop power adapter connector Wide DC power input operation 9-57V

Front Panel I/O M12-X front panel GbE receptacles, rail approved connector system, Cat6A, IEC 61076-2-109 1000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate front ports Future proof investment into cabling infrastructure - up to 10Gbps with M12 Cat6A M12 X-coded to RJ45 connector Cat6A cable assemblies available from several suppliers Additional RJ45 connector(s), for general usage M12-A 5-position male connector for DC power input AL110 only (CPU) M12-A five pin male power connector USB 3.0 Type-A Gigabit Ethernet RJ45 SD Card USB 2.0 Type-B (Programming/Debug) 2 x SMA RF (Wi-Fi & Bluetooth)

Power Requirements DC Input, 9-57V (12VDC, 24VDC, 48VDC) Power consumption 3W/6W/9W max. (5 - 10 - 15 ports, AL100) Fast acting chip fuse (PCB soldered type - no replacement on-site) Protected against reverse polarity TVS ESD protection Common mode input filter M12-A 5-position male connector for DC power input Pigtail cable assemblies available M12-A 5-pos. female plug Option 4-position terminal block power connector, 3.50mm pitch, screw lock removable cable plug Option rear power connector (desktop supply 4-pos. circular connector)

Gigabit Ethernet Switch(es) Marvell® 88E6390 based Gigabit Ethernet switch(es) 1 to 3 switches for 5 - 10 - 15 front ports Switches connected via 2.5Gbps SERDES (stacking connectors) In use 5 (10 - 15) x front port GbE MAC/PHY 1000BASE-T 1 (2 - 3) x RJ45 connector(s) w. integrated magnetics 4 (8 - 12) x M12 X-coded connectors (isolated by magmods) High performance, non-blocking, Gigabit Ethernet Support for up to 16K MAC addresses, 10KByte Jumbo Frames Supports 802.1 Audio Video Bridging (AVB) Gen 2 * Time Sensitive Networking (TSN) Standards *, IEEE 1588v2 one-step PTP Synchronous Ethernet * Quality of Service (QoS) support with 8 traffic classes Supports 4096 802.1Q VLANs, three levels of 802.1Q security Unmanaged solution (protocol support with additional mezzanine CPU card) Up to two internal mezzanine stacking connectors for communication to adjacent internal switch (10 - 15 port solutions) Internal switch communication via SERDES 2.5Gbps ports Two and three internal switch versions (10 - 15 ports) are virtually combined into a single switch with aggregated performance Internal communication via SERDES 2.5Gbps port and MDI to optional stacked processor (AL110, required e.g. for AVB/TSN *) AL110 Box available (AL100 with AC370 CPU for protocol support) * AVB/TSN protocols require additional CPU support (AL110), please refer also to AC370 product information

Applications Industrial networks - IIoT Rugged environments Transportation vehicles Construction and harvesting machinery Railway Customized design on request

Environmental, Regulatory Designed & manufactured in Germany Certified quality management according to ISO 9001 Long term availability Rugged solution RoHS compliant Operating temperature -40°C to +85°C (industrial temperature range) Storage temperature -40°C to +85°C, max. gradient 5°C/min Humidity 5% ... 95% RH non condensing Altitude -300m ... +3000m Shock 15g 0.33ms, 6g 6ms Vibration 1g 5-2000Hz EC Regulatory EN55035, EN55032, EN62368-1 (CE) MTBF 216.8 years (AL100 5-port switch) MIL-HDBK-217F Weight 0.35kg

all items may be subject to changes w/o further notice