EKF - Short Profile
EKF - Short Profile
AL220 - AL230 • Industrial Gigabit Ethernet Switch

8-Port 1000BASE-T Ethernet • PoE+

Embedded Blue®

AL220

Description


Product Information

Block Diagram

AL220 • Industrial PoE+ GbE Switch

Photo Gallery
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11

© EKF • Images show up in a secondary browser tab or window


Embedded Blue® Boxed Solutions

AL220 - AL230 • Industrial Gigabit Ethernet Switch
PoE+ IEEE 802.3at • DIN Rail Bracket or Wall Mount Plate


The AL220 is an eight port industrial Gigabit Ethernet switch box, 1000BASE-T, 100BASE-TX and 10BASE-T compliant. All ports are PoE+ (30W) enabled. The box is available for DIN rail or wall mount, and requires a fixed supply voltage 48/54VDC, applied via a pluggable terminal block.

The AL200 is based on the Marvell® 88E6390 self-managed Ethernet switch, and equipped with IEEE 802.3at Power-over-Ethernet controllers (TI TPS 23861). For AVB/TSN protocol support the box is also available as AL230, provided with a Marvell® ARMADA® CPU in addition.

AL220 PoE+ GbE Switch

AL220 • 8 Port Industrial GbE Switch


Feature Summary

General
  • 1000BASE-T Ethernet Switch box, for DIN rail mount or wall mount
  • 8 x RJ45 Gigabit Ethernet connectors, 802.3at PoE+ (up to 30W/port)
  • PoE+ support up to 120W in total
  • Intended for industrial use
  • Self-managed operation
  • Dimensions AL220: 30mm (W) x 140mm (H) x 90mm (D) w/o DIN rail brackets
  • Dimensions AL230: 45mm (W) x 140mm (H) x 90mm (D) w/o DIN rail brackets
  • Metal case, TS35 DIN rail bracket or wall mount plate
  • Terminal block power connector, pluggable & screw lock
  • M12-A power connector (AL230)
  • Nominal 48V/54VDC power input operation

Front I/O
  • RJ45 Ethernet connectors, with integrated PoE+ magnetics, CMC, TVS, fuses
  • 1000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate front ports
  • Terminal Block 3.5mm pitch 4-position screw lock (bottom of box) power input
AL230 only (CPU)
  • M12-A five pin male power connector
  • Gigabit Ethernet RJ45

Power Requirements
  • DC Input, 44V-57V (48VDC, 54VDC)
  • Power consumption 125W max. @120W external load (AL220)
  • Fast acting chip fuse (PCB soldered type - no replacement on-site)
  • Protected against reverse polarity
  • ESD protection (TVS)
  • Common mode input filter
  • 4-Position terminal block 3.50mm pitch screw locked for DC power input (AL220)
  • M12-A connector 5-position DC power input (AL230)
  • Option rear power connector (desktop supply 4-pos. circular connector)

Gigabit Ethernet Switch
  • Marvell® 88E6390 (Peridot) Gigabit Ethernet switch
  • Front ports GbE MAC/PHY 1000BASE-T
  • 8 x RJ45 connector(s) w. integrated PoE+ magnetics
  • High performance, non-blocking, Gigabit Ethernet
  • Support for up to 16K MAC addresses, 10KByte Jumbo Frames
  • Supports 802.1 Audio Video Bridging (AVB) Gen 2 *
  • Time Sensitive Networking (TSN) Standards *, IEEE 1588v2 one-step PTP
  • Synchronous Ethernet *
  • Quality of Service (QoS) support with 8 traffic classes
  • Supports 4096 802.1Q VLANs, three levels of 802.1Q security
  • Unmanaged solution (protocol support with additional mezzanine CPU card - AL230)
  • 2.5Gbps SERDES & SMI mezzanine connectors for additional mezzanine CPU card
* AVB/TSN protocols require additional CPU support (AL210), please refer also to AC370 product information

Power over Ethernet
  • PSE PoE+ according to IEEE 802.at
  • Maximum power delivered per port 30W
  • Maximum power delivered in total 120W
  • Type 2 endpoint PSE (power over RJ45 pins 1/2 & 3/6, 600mA)

Applications
  • Industrial networks - IIoT
  • TSN/AVB *
  • Rugged environments
  • Edge computing
  • Transportation
  • Custom specific programming (AL230)

Environmental, Regulatory
  • Designed & manufactured in Germany
  • Certified quality management according to ISO 9001
  • Long term availability
  • Rugged solution
  • RoHS compliant
  • Operating temperature 0°C to +70°C (commercial temperature range) available
  • Operating temperature -40°C to +85°C (industrial temperature range) available
  • Storage temperature -40°C to +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • International Protection EN60529 IP20
  • MTBF 78.4 years (MIL-HDBK-217F, SN29500 @+40°C)
  • EC Regulatory EN55035, EN55032, EN62368-1 (CE)
all items are subject to changes

AL220 - Simplified Block Diagram

AL220 - Simplified Block Diagram