The PC7-FESTIVAL front panel is provided with two RJ45 Gigabit Ethernet jacks, two USB 3.0 Type-A receptacles, and two DisplayPort™ connectors. In addition, a third USB Type-C front panel receptacle i available as an option, usable alternatively as (third) DisplayPort.

The powerful Xeon^® E3-1500 v6 series processor is accompanied by the CM238 mobile PCH, for a maximum of high speed I/O resources (e.g. PCI Express^®, SATA, USB).

The PC7-FESTIVAL is equipped with up to 32GB DDR4 RAM with ECC support. Up to 16GB memory-down are provided for rugged applications, and another 16GB are available via the DDR4 ECC SO-DIMM socket.

The backplane connector J1 allows for up to seven CompactPCI^® Classic peripheral cards in a system. The J2 connector complies with the CompactPCI^® PlusIO standard for high speed rear I/O (fourfold PCIe^®, SATA and USB2), or a hybrid CompactPCI^® Serial backplane.

• CompactPCI^® PlusIO (PICMG^® CPCI 2.30) System Slot Controller
• Form factor single size Eurocard (board dimensions 100x160mm²)
• Mounting height 3U
• Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
• Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
• Backplane communication via CompactPCI^® J1 and J2 hard metric connectors
• J1 Connector for PICMG^® CompactPCI^® 32-Bit Support
• J2 Connector for CompactPCI^® PlusIO support (PCIe^®, SATA, USB2)
• J2 PlusIO configuration allows for either CompactPCI^® Serial backplane usage or rear I/O module attachment
• J2 Connector option available for 64-bit system slot (legacy CompactPCI^® 2.0 Classic)
• Side cards and low profile mass storage modules available as COTS and also as custom specific

• +5V, +3.3V according to CompactPCI^® 2.0 via J1 backplane connector
• Total power consumption depends on processor type and mezzanine assembly
• +5V only board design for low cost system power supply with all 25W processors *
• SAC (Stand-Alone Computer) option w. two-pos. 5V/10A terminal block (J1/J2 removed)

* option different SKUs available with 25W processors for +5V/3.3V backplane supply - specify when ordering • on request: PC7-FESTIVAL +5V only can deliver +3.3V to backplane for CompactPCI^® peripheral boards

• Intel^® Kaby Lake-H mobile platform with ECC (CM238 mobile workstation PCH)

• Intel^® Xeon^® processor E3 v6 family (mobile workstation)
• Xeon E3 1505M v6 • 3/4GHz • 8M • 4C/8T • DDR4 2400 ECC • 45/35W • GT2 - P630 • vPRO™/AMT
• Xeon E3 1505L v6 • 2.2/3GHz • 8M • 4C/8T • DDR4 2400 ECC • 25W • GT2 - P630 • vPRO™/AMT

• 7th Generation Intel^® Core™ mobile processor
• i3 7100E • 2.9GHz • 3M • 2C/4T • DDR4 2400 ECC • 35W • GT2 - 630
• i3 7102E • 2.1GHz • 3M • 2C/4T • DDR4 2400 ECC • 25W • GT2 -630

• Phoenix^® UEFI (Unified Extensible Firmware Interface) V2.5 with CSM*
• Phoenix^® SCT (SecureCore Technology) Release V4.01
• ACPI V5.0
• Fully customizable by EKF
• Secure Boot and Measured Boot supported - meeting all demands as specified by Microsoft^®
• Windows^®, Linux and other (RT)OS' supported
• Intel^® AMT supported for Intel^® Xeon^® E3 v6 (disabled by default, must be enabled via BIOS setup)

* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS'

• Integrated memory controller up to up to 32GB DDR4 2400 +ECC
• DDR4 +ECC soldered memory up to 16GB
• DDR4 +ECC SO-DIMM memory module socket up to 16GB

• Mezzanine side card connectors for local expansion e.g. SSD mass storage
• Low profile mezzanine modules available (4HP common front panel)
• Side cards available (8HP common F/P assembly)
• P-HSE1 - configurable as 4 x SATA 6G or 4 x PCIe^® Gen3 (from CM238 PCH), 1 x USB3
• P-HSE2 - 4 x PCIe^® Gen3 (from CM238 PCH) & 3rd DisplayPort™ (from CPU)
• P-EXP - Legacy interface (from PCH)

• 4HP Low profile mezzanine module preferred options:
• C48-M2 Mezzanine module - 2 x M.2 2280 SATA SSD sockets
• S48-SSD - 1 x M.2 2280 NVMe^® SSD socket, 1 x M.2 2280 NVMe^® or SATA SSD socket (autosense), 1 x Type-C USB F/P connector (enabled for DisplayPort alternate mode)
• P82-GBE - 2 x 2.5GBASE-T for J2 backplane connector, 1 x M.2 2280 NVMe^® SSD socket

• 8HP/12HP Mezzanine side card options:
• P01-M12 Replacement for RJ45 GbE jacks by M12-X receptacles
• PCU-UPTEMPO - Side board w. 2 x M.2 SATA SSD sockets & front I/O
• PCZ-NVM - Side board w. 2 x M.2 NVMe^® SSD sockets & front I/O
• SCJ-VEENA - M.2 NVMe^® or SATA SSD socket (autosense), quad 2.5GBASE-T Ethernet RJ45 jacks
• SCL-RHYTHM - M.2 NVMe^® or SATA SSD socket (autosense), quad 1000BASE-T Ethernet M12-X ports

• Custom specific side card design - I/O and storage

• Integrated graphics engine, 3 symmetric independent displays
• 3D HW acceleration DirectX12, OpenCL 2.x, OpenGL 4.3/4.4, ES 2.0
• HW video decode/encode HEVC10b 10-bit, VP9 10-bit, JPEG
• HDR (High Dynamic Range) Rec. 2020 Wide Color Gamut
• Content protection
• UHD premium content playback
• Front panel options: Dual DisplayPort™ (DP) connectors
• 3rd DisplayPort™ optional via Type-C connector on low profile mezzanine card S48-SSD
• Max resolution 4096 x 2304 @60Hz (any DisplayPort, concurrent operation)
• DisplayPort™ 1.2 Multi-Stream Transport (MST) - display daisy chaining
• MST max resolution via single DP connector 2880x1800@60Hz (2 displays), 2304x1440@60Hz (3 displays)
• Integrated audio (3 independent audio streams)

• Up to four networking interface controllers (NIC), 1000BASE-T, 100BASE-TX, 10BASE-T connections
• Port 1 equipped w. I219LM PHY (suitable for Intel^® AMT)
• Port 2 equipped w. Intel^® I210-IT -40°C to +85°C operating temperature GbE controller w. integrated PHY
• IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
• IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streams
• IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
• Option 2 x 2.5GbE over J2 backplane connector with P82-GBE low profile mezzanine module
• RJ45 front panel jacks (option 2 x M12-X with mezzanine module P01)
• Option quad 2.5GbE RJ45 front panel ports with SCJ-VEENA side card (8HP front panel width)
• Option quad 1GbE M12-X front panel ports with SCL-RHYTHM side card (8HP front panel width)

• Intel^® CM238 Mobile Workstation Platform Controller Hub (PCH)
• PCIe^® Gen3 8GT/s
• SATA 6G
• USB3
• GbE
• SPI, LPC, Audio, Legacy

• Additional on-board controllers, PCIe^® based
• PCIe^® to PCI^® Bridge 32bit 33/66MHz for 7 CompactPCI^®Classic peripheral card backplane slots
• 1 x Gigabit Ethernet controllers Intel^® I210IT (front panel)
• 1 x Gigabit Ethernet PHY Intel^® I219LM (front I/O)
• IEEE 1588-2008 Precision Time Protocol including PPS and PPM signals supported

• Trusted Platform Module
• Discrete TPM 2.0 for highest level of certified platform protection
• Infineon Optiga™ SLM 9670 cryptographic processor
• Conforming to TCG 2.0 specification
• Option fTPM (firmware-based TPM 2.0) or dTPM (discrete TPM) selectable from UEFI (BIOS) setup

• AES hardware acceleration support (Intel^® AES-NI)

• 2 x Gigabit Ethernet RJ45 (1 = PCH & I219LM - Intel^® AMT support, 2 = I210IT)
• 2 x DisplayPort™ (from processor integrated HD graphics engine, standard DP latching receptacles)
• 2 x USB 3.0 Type-A

• Option Type-C USB 3.1 Gen1 w. S48-SSD low profile mezzanine module
• Support for Type-C locking plugs (dual screw) according to the 'Locking Connector Spec. Rev. 1.0'
• DisplayPort™ Alt Mode on Type-C connector (3rd video monitor output)

• Option RS-232, USB3, DisplayPort™ w. PCZ-NVM side card
• Option quad port 2.5GbE RJ45 jacks w. SCJ-VEENA side card
• Option quad port 1GbE M12-X receptacles w. SCL-RHYTHM side card
• Option 2 x M12 X-coded receptacles for Gigabit Ethernet (P01, as replacement for RJ45)
• Option RS-232, HD-Audio, USB w. PCU-UPTEMPO side card
• Custom specific front panel and side card design

• PICMG^® CompactPCI^® 2.0 CPU card & system slot controller for J1 based 32-bit CompactPCI^® systems
• Support for up to seven CompactPCI^® peripheral boards, 33/66MHz (PI7C9X112 PCIe^® to PCI^® bridge)

• PICMG^® CompactPCI^® 2.30 J2 connector pin assignment according to CompactPCI^® PlusIO
• J2 is assigned to 4 x PCIe^® Gen2*, 4 x SATA 3G*, and 4 x USB2 ports (all derived from PCH)
• Option 2 x 2.5GbE* over J2 backplane connector with P82-GBE low profile mezzanine module
• J2 can be used to enable CompactPCI^® Serial peripheral card slots for hybrid systems with a split backplane
• Hybrid small system racks available (e.g. SRP-BLUBOXX)
• J2 can be used alternatively for a rear I/O module
• Custom specific rear I/O module design on request
• J2 Connector option available - 64-bit system slot tolerant for legacy CompactPCI^® 2.0 (Classic)

* CompactPCI^® PlusIO specifies PCIe^® 5GT/s, SATA 3G and GbE 1000BASE-T only over J2 UHM. Due to obsolescence of the 3M UHM connector series the PC7-FESTIVAL will be equipped with a standard J2 hard metric backplane connector, which may result in PCIe^® 2.5GT/s (Gen1) backplane link training under adverse application conditions.

• Designed & manufactured in Germany
• ISO 9001 certified quality management
• Long term availability
• Rugged solution
• Coating, sealing, underfilling on request
• Lifetime application support
• RoHS compliant 2002/95/EC
• Operating temperature 0°C to +70°C
• Operating temperature -40°C to +85°C (industrial temperature range) on request
• Storage Temperature: -40°C to +85°C, max. Gradient 5°C/min
• Humidity 5% ... 95% RH non Condensing
• Altitude -300m ... +3000m
• Shock 15g 0.33ms, 6g 6ms
• Vibration 1g 5-2000Hz
• MTBF 21.2 years
• EC Regulatory EN55035, EN55032, EN62368-1

• General industrial computing, ready for x86 based software
• IIoT applications, edge computing, networking
• Medium to high embedded CPU performance
• CompactPCI^® Classic systems upgrade
• CompactPCI^® Serial peripheral card expansion
• Stand-Alone Computer (SAC)