|
Summary of Features
|
General
- PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot card
- Single Size Eurocard 3U 4HP 100x160mm2
- Option 8HP front panel width
- CPCI-S backplane connector P1
- PCIe x 4 upstream - Gen2 (5GT/s) required for optimum performance
|
PCI Express® Interface
- PCI Express® 9-port 12-lane packet switch PEX8614
- Upstream port: PCI Express® x4 Gen2 (5GT/s) supported
- Downstream ports: 8 x PCIe® x1 (4 x USB controllers, 2 x Ethernet NICs, 1 x Mini Card socket, 1 x UART)
|
USB Interfaces
- 4 x Texas Instruments PCI Express® dual port USB 3.0 controller TUSB7320
- USB 3.1 Gen1 (formerly USB 3.0) xHCI (eXtensible host controller interface) SuperSpeed supported
- USB 2.0 high-speed, full-speed, low-speed supported
- 4 x front panel Type A USB 3.0 host connectors
- VBUS (+5V) 1.5A high current power switches assigned to front panel connectors
- Option on-board Type-A connector, suitable for on-board USB stick
- USB 2.0 wired to PCIe® Mini Card socket
|
Networking
- Two networking interface controllers (NIC), 1000BASE-T, 100BASE-TX, 10BASE-T connections
- Intel® I210-IT -40°C to +85°C operating temperature GbE controllers w. integrated PHY
- IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
- IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensitive streams
- IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
- Two GbE ports via RJ45 front panel jacks (option 2 x M12-X connectors with mezzanine module P01)
|
UART
- Diodes® (Pericom®) PCI Express® quad port UART PI7C9X7954
- High performance 950-class UART
- 16C550 software compatible
- 128-Byte FIFO for each transmitter/receiver
- Baud rate up to 15Mbps
- XON/XOFF in-band flow control
- CTS/RTS or DSR/DTR out-of-band control & driver enable signal for PartyLine operation
- Data frame 5, 6, 7, 8 and 9 bits
- Clock prescaling 4 to 46
- Windows® WHQL device driver support
- Two on-board RS-232 transceivers MAX3243, pin headers suitable for attachment of D-Sub 9-pin connectors by means of micro-ribbon flat cable
- Two UART channels wired tor pin headers suitable for SU*-series modules (isolated RS-232 or isolated RS-485)
- Custom specific F/P design for additional D-Sub or Micro-D connectors (8HP or wider)
|
PCI Express® Mini Card
- PCI Express® Mini Card socket, full-size or half-size modules
- Micro SIM card holder associated (15mm x 12mm ETSI TS 102 221 V9.0.0, Mini-UICC)
- PCI Express® Mini Cards of both styles supported: USB and PCIe® based
- Suitable for wireless applications
- Suitable for fieldbus modules e.g. CAN-FD, and industrial Ethernet modules (real time networking)
- Custom specific F/P design for additional pigtail SMB antenna connectors (8HP or wider)
- Custom specific F/P design for non-radio applications e.g. CAN-FD (8HP or wider)
|
Applications
- Mixed I/O: USB - Ethernet - UART - fieldbus or wireless
- Flexible usage by means of Mini Card socket (PCIe® or USB module)
- Data acquisition, data translation, gateway
- Fieldbus or real time networking
- IIOT, edge computing
|
Environment & Regulation
- Designed & manufactured in Germany
- ISO 9001 certified quality management
- Long term availability
- Rugged solution (coating/sealing available on request)
- RoHS compliant
- Operating temperature: -40°C to +85°C (industrial temperature range)
- Storage temperature: -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 24.6 years
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
|
