|
Feature Summary
|
General
- PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot card
- Single size Eurocard 3U 4HP 100x160mm2
- Backplane connector P1 (peripheral slot PCIe® x1)
|
PCI Express® Interface
- Gen2 PCI Express® 6-port packet switch
- Upstream port: PCI Express® x1 Gen2 (5.0Gbps) or Gen1 (2.5Gbps) supported
- Downstream ports: 4 x PCIe® Mini Card, Gen1 and Gen2 support
|
PCI Express® Mini Card
- 4 x PCI Express® Mini Card sockets, full-size or half-size modules, PCIe® based
- Validated with PEAK System PCAN-miniPCIe Dual Channel for CAN 2.0A and 2.0B
- Validated with PEAK System PCAN-miniPCIe FD Four Channel for CAN FD
|
Front Panel Connector
- 4 HP front panel design
- D-SUB 37-pin connector and cable harness for up to 4 x PCAN-miniPCIe (8 ports)
- D-SUB 50-pin connector and cable harness for up to 4 x PCAN-miniPCIe FD (16 ports)
- Custom specific front panel design, e.g. 8 x D-SUB 9-pin connectors with 12HP front panel width
|
Applications
- Test equipment for automotive networks
- Industrial automation
- Autonomous devices - IoT
- Medical equipment
|
Special Features SF2-1080-CANDY • CAN 2.0A/B
- Up to 4 x Peak System PCAN-miniPCIe dual channel CAN I/O module, PCIe® based
- 4 x 2 High-speed CAN channels (ISO 11989-2)
- Bit rates from 5 kbit/s up to 1 Mbit/s
- Bus length up to 13km
- Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
- FPGA implementation of the CAN controller (SJA1000 compatible)
- NXP PCA82C251 CAN transceiver
- Galvanic isolation on the CAN connection up to 300 V, separate for each CAN channel
- Extended operating temperature range from -40°C to +85°C
- Full device driver support Windows 10, 8.1, 7 and Linux 32/64-bit
- Programming interface PCAN-Basic for developing applications with CAN connection
- Programming interfaces for standardized protocols from the automotive sector
- 4HP front panel width - up to 8 CAN ports wired to a common front panel connector D-SUB 25-pin
- 4HP, 8HP and beyond custom specific front panel design with other connector(s) on request
|
Special Features SF2-2160-CANDY • CAN FD
- Up to 4 x Peak System PCAN-miniPCIe FD quad channel CAN I/O module, PCIe® based
- 4 x 4 High-speed CAN channels (ISO 11989-2)
- Complies with CAN specifications 2.0A/B and FD
- CAN FD support for ISO and Non-ISO standards switchable
- CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
- CAN bit rates from 25 kbit/s up to 1 Mbit/s
- FPGA implementation of the CAN controller (SJA1000 compatible)
- NXP TJA1044GT CAN transceiver
- Galvanic isolation on the CAN connection up to 300 V, separate for each CAN channel
- PCIe data transfer via bus master DMA
- DMA memory access operations with 32- and 64-bit addresses
- Measurement of bus load including error/overload frames on the physical bus
- Induced error generation for incoming and outgoing CAN messages
- Extended operating temperature range from -40°C to +85°C
- Full device driver support Windows 10, 8.1, 7 and Linux 32/64-bit
- Programming interface PCAN-Basic for developing applications with CAN connection
- Programming interfaces for standardized protocols from the automotive sector
- 4HP front panel width - up to 16 CAN ports wired to a common front panel connector D-SUB 50-pin
- 4HP, 8HP and beyond custom specific front panel design with other connector(s) on request
|
CANopen®
- Fully CIA CANopen® compliant protocol set
- SDO - PDO - NMT - Special Functions - Error Control
- Software tools available on request:
- CANopen® Magic - Analysis-, Development, and Simulation Software
- CANopen® PC Developer Kit - Development Package for CANopen® Applications
- Embedded CANopen® Library
- CANopen® Controller Library
|
Regulatory, Environment
- Designed & manufactured in Germany
- ISO 9001 certified quality management system
- Long term availability
- Rugged solution - coating, sealing, underfilling on request
- RoHS compliant
- Operating temperature -40°C to +85°C (industrial temperature range)
- Storage temperature -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 39.6 years (carrier card)
- EC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
|
